The digital learning portal (LX) for individual learning experiences offers carefully prepared learning content for many technical topics.

SupraMotion enables objects to be suspended and moved without contact – with low energy consumption and completely without any control technology for the suspension.

With the Festo Automation Experience (AX) machine data can be monitored, anomalies can be detected and operation and maintenance processes in production can be improved.

Natural principles generate new ideas for technology and industrial applications in the Bionic Learning Network. The BionicSoftHand is a pneumatic robot hand with artificial intelligence, which simulates the strength, dexterity and fine motor skills of a human hand.

The Festo Motion Terminal enables app-controlled pneumatics and a valve structure with many more degrees of actuation freedom, as well as integrated data acquisition and data processing.

The modules C2M and E2M from the MSE6 series enable condition monitoring via fieldbuses or PROFINET and provide measured values such as pressure and flow rate in the PLC.

The new I/O system in IP65/IP6 gives you connectivity in real time: CPX-AP-I allows powerful input/output modules and existing valve terminal interfaces to be integrated into the most important host systems.

The electric alternative for extremely straightforward motion tasks between two mechanical end positions. The fully integrated units are plug and work, so do not need any software for commissioning.

With the new servo drives of the CMMT range you will benefit from maximum connectivity of the hardware and software as well as easy operation. You create the optimum connection between your mechanical system and the control technology and are ready for operation in just a few minutes thanks to the Festo Automation Suite.

The new round cylinder DSNU-S from the Festo Core Range has been made significantly smaller and lighter and is easier to operate. The self-adjusting PPS cushioning ensures dynamic and gentle movement to the end position and needs no readjustments during mounting or if the load is changed.

The dispense head VTOE is a modular complete solution consisting of a manifold duct plate, dosing valves and nozzles and enable contactless, highly precise dosing of extremely small volumes in laboratory automation.

The proportional valve VPWS is a lightweight and extremely compact 15 mm cartridge valve with a high flow rate. It regulates gas flows reliably and is ideal for medical ventilation and anaesthesia systems.